V6AC BUILT IN AC BALANCE CHARGER

SPECIAL FEATURES:
Charges, Discharges and Balances
For Li-Po, Ni-CD, Ni-MH, Li-Ion and PB Batteries

AC Power Supply Built In
Touch Pad Keyboard
Optimized operating software, The V6AC Balance features an AUTO function that sets the current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's incorrect setting.

V6AC Balance can disconnect the circuit automatically and alarm once detecting any malfunction.

V6AC employs an individual-cell-voltage balancer. It isn't necessary to connect an external
balancer for balance charging.

During the process of discharging, V6AC Balance can monitor and balance each cell of the battery pack individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal

V6AC Balance is adaptable to various types of Lithium batteries, such as Li-ion, Li-Po and the new Li-Fe series of batteries.

Fast and storage mode for lithium batteries. 'Fast' charge reduces the duration of charging, while 'Store' state can control the final voltage of your battery, to store for a long time and protect useful life time of the battery.Maximum safety!

Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

Automatic charging current limit:
You can set up the upper limit of the charging current when charging your Ni-Cd or Ni-MH battery; especially useful for Ni-MH batteries of low impedance and capacity when using the 'AUTO' charging mode.

Capacity limit: The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature threshold* The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included.

Data store/load
A maximum of five batteries' data can be stored for users' convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out this data at any time without any special program setting.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: