HobbyWing XErun 120A Brushless ESC V3 Black

Brand: HOBBYWING
Product Code: HWXE120ASDV3BLACK
Availability: In Stock

Price: $204.99

Qty:

- OR -

Description Reviews (0)

Features:

All in One. Up to ten profiles can be stored in the memory and imported or exported easily. Factory pre-set profiles include:
Blinky mode, Modify Mode, Stock mode, Practice mode, Offroad mode, Drift mode, Crawler mode.
Built-in Electronic Switch, long life and high reliability, also saves space on the chassis.
Aluminum Upper Case with optional colors, giving better heat dissipation, and allowing higher current.
External Programming Port (EPP), easy to connect and also a power port for additional fan.
Advanced Dynamic Timing technology, providing more customization possibilities for highest level competitions.
Precise throttle and brake control, setting of drag brake and brake strength with more options, new punch and brake rate control functions, and throttle and brake curves through the PC client.
Integrated Data logger, recording the maximum temperature of ESC and motor as well as the maximum RPM, using LCD Programming box to check easily in the pits.
Multi Protection Functions, making your running safe with ESC and Motor overheat protection, low voltage cutoff and throttle signal loss protection.
Easily programmed with the Professional LCD Program Box and USB Link Software
(Note: XERUN V3 ESC ONLY works with the new version of the USB Link Software, that is, the version not ealier than V3.0_Beta_120401)
New USB LINK Software graphic interface, providing extra parameters for advanced settings.
ESC firmware can be updated through the USB adapter in the LCD Program Box.

Specification:

Current: (Continuous) 120A, (Burst) 760A
Input: 4-9 cells NiMH/NiCd or 2-3S LiPo
Built-in BEC: 6V @ 3A (linear mode)
Resistance: 0.0003Ohm
Motor Supported: Sensored and sensorless brushless motor
Suitable motor: (With 2 Lipo or 4-6 NiMH) 1/10 on-road: >=3.5T; 1/10 off-road: >=5.5T. (With 3 Lipo or 7-9 NiMH) 1/10 on-road: >= 5.5T; 1/10 off-road: >=8.5T
Suitable car: 1/10, 1/12 all competitions; 1/10, 1/8 rock crawler
Cooling fan: 5v
Size: 37.5mm x 31mm x 29.5mm (excludes wire connectors). 37.5mm x 37mm x 29.5mm (includes wire connectors)
Weight: 93g

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: