Description:
Tired of charging one battery at a time? Try iMAX Quattro B6! At last, a charger
where you can charge 4 Battery packs at the same time no matter what battery
type you may have. This charger allows you to plug 4 batteries into one charger
simultaneously, and it will intelligently and automatically charge all 4 of
them at once to their maximum capacity. To top of it, the batteries being charged
do not even need to have the same configuration. You can connect different chemistry(Ni-MH/Ni-CD/LiPo/LiFe)batteries
into any of the charging ports. No more staying up late for charging batteries.
Feature:
High Performance Micro Processor: iMax Quattro B6 Pro Charger & Balancer
is a rapid charger with a high performance microprocessor.
Individual Voltage Balancer: Quattro B6 has an individual-cell-voltage balancer
inside. This does not require any extra balancer when charging Lithium batteries
(Lilo/LiPo-LiFe) for cell voltage balancing
Suitable for various types of Lithium batteries: Quattro B6 can accept three
types of Lithium batteries – Lilo, LiPo and LiFe. They have different
characteristic by their chemistry. You can select any one of them that you are
going to process before the job. For their specifications, refer Warning and
safety notes section.
Maximum safety: The automatic charge termination program works on the principle
of the Delta-peak voltage detection. Auto-charge current limit: When charging
NiCd or NiMH at AUTO current mode, you can set the upper limit of charge current
to avoid from high current charging. Capacity Limit: If the charging capacity
exceeds the limit the process will be terminated automatically when you set
the maximum value.
Processing time limit: You can also restrain the maximum process time to prevent
from any possible defect.
Data store / load: For users convenience it can store 5 data of different batteries
per charger (20 in total) You can establish the data contains program setting
of the battery to charge or discharge continually. These data can be called
out at any time you need and the process can be executed without program setting.
High-power and high-performance circuit: Quattro B6 employs the circuit that
has maximum output power of 200W. As a result it can charge up to 15 cells NiCd
/ NiMH 6 cells lithium with max current of 5A and 8 series of Lithium batteries
with maximum current of 7.0A. Furthermore the cooling system is so efficient
that can hold such a power without any trouble of running the CPU or the operating
program.
Optimized User Interface:Quattro B6 has an AUTO function that sets the feeding
current automatically. It can prevent the over-charging. Program in the unit
are controlled with mutual links and communication for every possible error
for maximum safety.
Balancing individual cells battery discharging: Quattro B6 also can monitor
and balance individual cells of the Lithium battery pack during the discharge
process. If the voltage of any one cell varies abnormally, the process will
be stopped with the error message.
Lithium battery Fast and Storage mode: You can charge Lithium battery for special
purpose. Fast charge reduces the charging time of Lithium battery and Storage
mode controls the final voltage of the battery to be suit for long time storage.
Temperature threshold (Optional): The temperature of the battery on charging
will be rise by its internal chemical reaction. If you set the limit of temperature
the process will be expired forcibly when the limit has reached.
Input power monitoring:To protect the car battery using as input power from
being damaged the voltage of it always monitored. If it drops below the lower
limit the process will be ended automatically.
Cyclic charging / discharging:Perform 1 to 5 cycles of charge / discharge or
discharge / charge continually for battery refreshing and balancing.
Specification:
Input: DC 11 to 15V
Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0 )
Charger power: 50Watts, current is regulated accordingly.
Discharger power: 5 watts, current is regulated accordingly
Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide
cells (2V to 20V)
Current drain for balancing Lithoum: 300mA
Charge termination: automatic, negative delta peak method for NiCd/NiMh; and
automatic, voltage-dependent, CC-CV process
Dimensions: 225.4 x 158.6 x 62.4mm
Net weight: 1.09kg
Include:
Charger(1 Pc)
Alligator Clips for Pb Battery (1 Pr)
Alligator to Bullet Connector Cable (1 Pc)
JST to Bullet Connector Cable (1 Pc)
Futaba to Bullet Connector Cable (1 Pc)
Tamiya to Bullet Connector Cable (1 Pc)
Bullet Connector with Wire (1 Pc)
TP/FP Adaptor (1 Pc)
XH Adaptor (1 Pc)
Instruction Manual (1 Pc)